Catalog pricing shown. Please Sign In to see your pricing.
Arcoaire AC Single Phase Split System Deluxe Single Stg 5 Ton 61k BTU 80Pct ULN Gas Furnace 100 MBH 13.8 SEER2
Arcoaire AC Single Phase Split System Deluxe Single Stg 5 Ton 61k BTU 80Pct ULN Gas Furnace 100 MBH 13.8 SEER2
Kit Includes BIP Gas Cock, PVC Ptrap Kit, Electrical Box, Switch, Receptical & Duplex Cover, whip 6' 3/4" 8GA, Disconnect, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, No Vent Caps, 2" Plastic Pad, Furnace Leveler, 2H/2C Thermostat
Motor Freight
- Vendor Name:
- Arcoaire
- URI Part Number:
- Arcoaire AC Single Phase Split System Deluxe Single Stg 5 Ton 61k BTU 80Pct ULN Gas Furnace 100 MBH 13.8 SEER2
- Shipping Weight (Lbs.):
- 200
- Energy Star:
- Not Energy Star Compliant
- Heating Input (BTUH):
- 100 MBH Heat
- Includes:
- H4A6S60AKAWA, N80ESU1002120A, EVD4X61M24A, ACGKIT9
- Nominal Capacity (BTUH):
- 60000
- Cooling Efficiency (EER2):
- 11.2
- Cooling Efficiency (SEER2):
- 13.8
- System Indoor Type:
- ULN Gas Furnace
- System Outdoor Type:
- Single Stage
- System Coil Configuration:
- Vertical Power "V
- Furnace Efficiency:
- 80
- System Nominal Tons:
- 5
- AHRI System Number:
- 208080714
A/C, Single Phase, Split ULN Gas Furnace Single Stage, Vertical Power "V" H4A6S/N80ESU/EVD4X
Air Conditioner Condenser
Air Conditioner Condenser
- 80% AFUE
- Flame roll-out sensors standard
- Category I venting
- Blocked vent switch
- Louvered door
- 24 VAC and 115 VAC humidifier terminal
- Electronic air cleaner terminal
- Select sizes approved for twinning, refer to accessory kit listing
- N80ESL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
- Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
- Adjustable heating blower OFF delay
- Factory set blower ON delay
- RPJ aluminized steel heat exchanger
- High temperature limit control designed to prevent overheating
- Direct ignition with Silicon Nitride igniter
- One piece prepainted steel cabinet
- In-shot burners
- 33 1/3” (847mm) high, for ease of installation
- Quarter turn knobs for easy door removal and secure attachment
- Factory shipped for natural gas, convertible to propane with accessory kit
- Four position - upflow/downflow/horizontal (left/right) installation
- Three position inducer elbow capability
- Through the casing flue pipe for counterflow applications
- Common venting with other Category I appliances
- Masonry chimney adapter available
- Self diagnostics
- Slide out blower assembly
Gas Furnace
- Efficient multi-speed ECM blower motor
- Variable-speed induced draft combustion motor
- Single-stage gas valve
- Natural Gas only, not convertible to Liquid Propane
- 4 Way Multipoise
- Stainless steel heat exchanger
- Reliable direct gas ignition with silicon nitride ignitor
- High temperature limit control helps prevent overheating
- Solid, pre-painted steel cabinet with tight fit door latch system
- Sound-reducing features: fully insulated cabinet with soft mounted blower and inducer motor
- Compatible thermostat: heat/cool with humidity sensing
- Heating capacity: 40,000 - 100,000 BTUh
- Corrosion Resistant Aluminum
- Low Pressure Drop
- TXV metering device factory installed
- Compact design, shorter than A-coils
- Hemmed flanges for safer handling
- Cabinets meet or exceed 2% air leakage codes
- UV knockout
- No delta plate allows easy cleaning
- 30-40% Lighter than “A” Coils
- 80% Fewer Factory Braze Joints vs. “N” Coils
- V Design Reduces Cabinet Sweating
- Helium leak tested @ the factory
